Tired of the same old radio commercials or cassette music from yesteryears? Upgrade Porsche CR-1 & CR-2 radios to support Bluetooth.
Using a phone in any way while driving can be dangerous, and if your vehicle still has the original CR-1 or CR-2 radio lacking support for more attractive modern media formats; the A2DIY-CR12 is for you! This remarkable add-on module is specific built for Porsche CR-1 & CR-2 radio owners seeking to (1) Stream Apple music, Pandora, Spotify, Tune in etc. (2) Make/receive phone calls safely using their Bluetooth® mobile phone and also able to (3) Connect audio devices through a wired input jack. This module supports aptX "CD-like’ high quality audio streaming (A2DP) allowing users to play internet music, turn-by-turn directions and more. The included new media remote control allows users to accept/end call, change tracks, adjust smart device volume, switch between Bluetooth and AUX all while keeping eyes on the road. After initial pairing and upon entering vehicle; your smart device will automatically pair to module hidden behind the dash. This clean solution leaves no wires on or around the dash and is the accessory you want if looking to add Bluetooth features and keeping original radio.
» Connects to radio 13-pin CD port (not FM modulated)
» Bluetooth® 4.1 (support for music streaming (A2DP) and Hands-Free (HPF) profiles.
» Supports aptX™, MP3, AAC and SBC audio codecs ensures higher quality audio encoders over Bluetooth.
» Works with Porsche CR-1 and CR-2 radios without optional CD changer.
» Auto-reconnect/disconnect with Smartphone upon entering/exiting vehicle.
» Stream Apple music, Pandora, Spotify, Tune-in and more.
» 3.5mm AUX input jack with 3ft. audio cable
» Includes adaptive electric condenser cartridge with high sensitivity, low impedance, anti-noise microphone
» Optional: USB type-C "Fast charging" kit keep devices charged while on the road
[To avoid costly returns, It is important to observe all requirements, warnings and install guide information prior to purchase.]
1. Exclusive to Porsche 911, 964, 993, 944, 968 with CR-1 or CR-2 radios only Not for other Porsche radios (e.g. CD-1 or CD-2, CD-210 etc.)
2. Connects directly to 13-pin socket on radio.
3. CD changer (if present), must be disconnected and will no longer function
» Bluetooth module (3.25" x 2.1" x"1) x1
» New! Bluetooth remote control with steering wheel holder (1.5"x 1.5" x. 0.67") x1
» Microphone with visor clip on 10 ft. cable x1
» 3.5mm male to male Aux cable (3 ft.) x1
» Optional "Fast charge" kit includes USB extension cable
Footnotes: [See drop-down for reference]
*Not for other Porsche radios
Avoid costly returns. Prior to ordering; please review your INSTALL GUIDE and frequently asked question prior to ordering.
1. Exclusive to Porsche CR-1 and CR-2 radios without CD changer. CD changer (if present) must be disconnected.
2. This kit must first be assembled (built by hand) after which time it is then shipped using shipping method selected at checkout.