Tired of the same old radio commercials or cassette music from yesteryears? Upgrade Porsche CR-1 & CR-2 radios to support Bluetooth.
Using a phone in any way while driving can be dangerous, and if your vehicle still has the original CR-1 or CR-2 radio lacking support for more attractive modern media formats; the BT3-CR12 (formerly A2DIY-CR12) is for you! This remarkable add-on module works on Porsche CR-1 & CR-2 radio to allow (1) Hands-Free calls, (2) audio streaming (e.g Apple music, Pandora, Spotify, Tune in etc.) (3) USB charging. Once installed, users are able to safely answer/end calls, track up/down, adjust device volume using the "SEEK" buttons on radio and also charge their devices thanks to the built-in 5V/2A USB port (optional dash mount USB extension cable is available here.) After initial pairing and upon entering vehicle; your smart device will automatically pair to module hidden behind the dash. This clean solution leaves no wires on or around the dash and is the accessory you want if looking to add Bluetooth features and retaining OEM radio.
» Bluetooth® 4.2 support for Hands-free & music streaming profiles.
» Work on Porsche CR-1 and CR-2 cassette radios in vintage 911, 964, 993, 944, 968 .
» Auto-reconnect/disconnect upon entering/exiting vehicle.
» Adaptive electric condenser cartridge high sensitivity, low impedance, anti-noise microphone.
» New! Supports Incoming call number announced on car speakers. (Enabled through phone setting)
» Use simultaneously with GPS application for turn-by-turn directions on car speakers
» Stream internet music services such as Apple music, Deezer, Spotify, SiriusXM, TuneIn, YouTube, audiobook, Podcast, GPS etc.
» Replaces remote/external CD changer (if present).
» New! Bluetooth Wireless Audio Control (AVRCP) allows the radio or steering wheel "SEEK" buttons to change track.
» New! Bluetooth Wireless Audio Control (AVRCP) allows the radio or steering wheel "SEEK" buttons to answer/reject call.
» Optional: 6 ft. dash mount USB extension cable (Click install guide below for details)
[To avoid costly returns, It is important to observe all requirements, warnings and install guide information prior to purchase.]
1. Exclusive to Porsche 911, 964, 993, 944, 968 with CR-1 and CR-2 radios only. Not applicable to any other Porsche radio.
2. Connects directly to the 13-pin socket behind the radio.
3. CD changer (if present), must be disconnected and will no longer function
» Bluetooth module (2" x 2" x".75) x1
» Microphone with visor clip on 10 ft. cable x1
» Installation harness x1
» Optional: 6 ft. dash mount USB extension cable (Click install guide below for details)
Footnotes: [See drop-down for reference]
*Not for other Porsche radios
Avoid costly returns. Please review your INSTALL GUIDE and frequently asked question prior to ordering.
1. Exclusive to Porsche CR-1 and CR-2 radios without CD changer. CD changer (if present) must be disconnected.
2. This kit must first be assembled (built by hand) after which time it is then shipped using shipping method selected at checkout.