Use this cable when installing a Clarion 8-pin marine remote to older 6-pin radio.
Your Clarion marine remote is damaged, no longer function etc. and a direct replacement may no longer be available (discontinued). Installing a newer remote poses two problems, namely the hole size and the connecting cable. Resolving hole size is easy but the connecting cable can only be resolved by rewiring. Why? Because helm to cabin remote control cable in most boats has only 6-pins and as of 2009; Clarion marine products have 8-pins which means the remote won't connect (fit). The CCUMRA2 cable makes it possible for newer 8-pin remote to connect with older 6-pin radios with some restrictions (see footnotes) or APPLICATION GUIDE
» Connect older (Pre-2009) radios to new style (2009+) wired remote controls (e.g. MW1, MW2, MW3 etc.)
» Can also connect to old radio, but must have an 8-PIN Y-cable (MWRYC) or 8-PIN extension cable (MWRXC-RET).
» Older Clarion wired marine remotes do not support IR remote signal pass-through (e.g. MF-1 etc.)
Does my application require the CCUMRA1, CCUMRA2 or both?
1. To install a 2009+ 8-PIN radio and keep old (pre-2009) 6-PIN remote; purchase our CCUMRA1 .
2. To install a new 8-pin remote and keep old 6-pin radio, purchase our CCUMRA2.
3. To install a new radio and new remote (both 8-pin), purchase (1) CCUMRA1 and (1) CCUMRA2. Please check application prior to ordering
4. Not applicable to Clarion/JL audio newest marine remotes (e.g.CMR-10,CMR-30, MMR-40 etc.). See our CMRR-C5 instead.
Warning: This cable DOES NOT retain remote LCD function. Once installed, the remote LCD display will be blank but buttons remain functional.
Please check Marine remote Application guide and installation instructions prior to ordering.
Footnotes: [See drop-down for reference]
**Remotes with LCD functionality, mute button and IR signal pass-though are not supported when CCUMRA2 adapter cable is used.
1. Remotes with LCD display (e.g. NW1, NW2, etc.) will not display radio station, CD track, etc. (remains blank), however; function buttons (e.g.. Track up/down, volume etc.) remain operational.
2. To install a newer (2009
+) radio and keep old remote, our
CCUMRA1 is required.
3. Made by us for use on Clarion marine radios/remotes only. Not for other brands or mix-n-match applications.