Update vintage Jaguars with CD changer to support music streaming, charging and also retain CD changer playback.
Just because you drive an older car does not mean you have to settle for the same radio stations, CD's or Cassettes, and if adamant about keeping vehicle as original possible; the BTA-JAG97CD (formerly A2D-JAG97) allows the factory radio to support modern media formats which is sure to open up a world of options for listening to music and other audio content. The BTA-JAG97CD works in many 1988-97 Jaguars with a functioning CD changer in luggage compartment to provide a wireless streaming solution for Smartphone, Echo Dot, Tablet etc. Note: The required CD changer; must be in working order, otherwise the BTA-JAG97CD will not work as described.- See our BT3-JAG97 instead. Installation is simple and requires connecting module to the 8-pin CD changer port behind the radio (radio removal required). Once installed and after a short pairing session; enjoy crystal clear playback from applications such as Pandora, Spotify, Deezer, Apple music, SiriusXM, audio books, GPS guidance, phone charging (5V/2.1A) and more. This clean solution leaves no wires or clutter on or around the dash and is the accessory you want without investing in a new radio or forfeiting the CD changer.
» Bluetooth 4.2 support for audio streaming. Does not support hands-free calls. See our BTH-JAG97CD instead.
» Compatible vehicles must have a fully functioning CD changer in luggage compartment.
» New!! Wireless remote for track, volume, play, pause and switch controls
» Auto-pairing/un-pairing upon entering/existing vehicle.
» Retains CD changer playback (CD changer remains connected and fully functional).
» Stream internet music services such as Apple music, Deezer, Pandora, Tune-in, Spotify etc.
» Optional: 6 ft. dash mount USB extension cable (Click install guide below for details)
[These issues or circumstances may affect compatibility of our product with your radio or vehicle.]
1. Works in 1994 XJ40, 1988-97 X300 (XJ6, XJR6, XJ6, XJ12,XJR, VP) with a functioning remote CD changer in luggage compartment.
2. Works in early 1997 X100 (XK8) with a functioning remote CD changer in luggage compartment. (See Note #4)
3. Works in XJS with a functioning remote CD changer in luggage compartment.
4. Not applicable to late 1997 XK8 (X100) with Alpine Ai-NET style CD changer connector. These requires our BTA-JAG98 instead.
5. The required CD changer remains connected and functional.
» Main module (2 x 2 x 0.75) x1
» Wireless remote control (35mm)
» Remote control battery (CR2025) x1
» double-sided tape x1
» Installation harness with ACC wire (2 ft.) x1
» Optional: 6 ft. dash mount USB extension cable (Click install guide below for details).
 Avoid costly returns. Please read entire INSTALL GUIDE and frequently asked question prior to ordering.
Footnotes: [ See drop-down for reference]
* Late 1997 XK8 (X100) with Alpine Ai-NET style connector is NOT compatible. See our
BTA-JAG98 instead.
** CD changer must be fully functioning (able to play CD's). If CD changer malfunctions or vehicle does not have one; purchase our
BT3-JAG97 instead.
1. Connects to radio behind the dash. A functioning remote CD changer is required.
2. Supports Bluetooth audio streaming (A2DP) profile only.
Not for hands-free calls. Our
BTH-JAG97CD supports both hands-free and streaming.
3.
This kit does not ship same day. It must first be assembled (built by hand) after which it is then shipped using shipping method selected at checkout.