Upgrade the factory radio in select 1995-05 GM to support Bluetooth streaming from Smartphone.
Your older GM still drives great, but lack support for more attractive modern media formats most would love to have in their cars. Replacing the radio with aftermarket is one option, but those adamant about keeping their vehicle as original as possible will be pleased to find a solution sure to open up different options for listening to music and other audio content while on the road. The BLU-GM1 (v2.24); upgrades the factory radio in select 1995-05 GM to support streaming from any A2DP capable device including smartphone, Tablet, Car play, Kindle, Laptop etc. all without wires or requiring a factory installed separate player. Separate player (CD or TAPE in lower dash) if present; must be disconnected from radio 9-pin port. To retain use of separate player; purchase our BTA-GM1 instead. The BLU-GM1 is the perfect add-on for GM vehicles owners looking to upgrade to streaming without replacing original radio or disrupting the dashboard.
» Support for Bluetooth V3.0 streaming profile.
» Does NOT support Hands-Free calls) -- see our A2DIY-GM1 instead.
» Direct connection to factory radio 9-pin port (Bose or non-Bose) for the best sound on car speakers.
» Easy plug-n-play installation in less than 30 minutes.
» Disconnects/reconnects upon exiting/entering vehicle.
» Enjoy GPS guidance, Pandora, Spotify, Podcast, Apple music and more
» Optional: smart remote control (Click Install guide for details)
[To avoid costly returns, It is important to observe all requirements, warnings and install guide information prior to purchase.]
1. Works on 1995-05 AM/FM/TAPE radios with "TAPE AUX" "CD TAPE" or "CHANGER" button on faceplate.
2. Works on 2000-05 AM/FM/CD radios with "CD AUX" button on faceplate and 9-pin port.
3. Does not work on 1995-99 AM/FM/CD radios. (Don't ignore this warning!)
4. Does not work on radios with "SOURCE" or "CD/PLAY" button. Radios with "SOURCE" button requires our BLU-GM2 (pre-wired 10-pin plug) or A2D-GM32 (not pre-wired).
5. Separate player (CD or TAPE) or 12-disc CD changer (if present) must be disconnected. Purchase our BTA-GM1 to retain separate player.
6. The "CD" or "TAPE" player built-into AM/FM/radio remains functional.
» Main module x1 (3"x 3"x 1")
» 9-pin plug-n-play installation harness x1
Optional smart remote control (Click installation instructions for details)
Footnotes [See drop-down for reference]
*1995-1999 AM/FM/CD radios (CD/AUX) button are NOT compatible.
2000-05 AM/FM/CD radios are compatible. (Don't ignore this warning)
If radio is not original; please check manufacture date sticker on radio chassis.
Avoid costly returns! Please read entire INSTALL GUIDE and frequently asked questions prior to ordering.
1. Separate CD, Tape player or CD changer (if present) must be disconnected. Purchase our BTA-GM1 to retain separate player.
2. Does not support Hands-Free calls (HFP) See our A2DIY-GM1 instead.
3. This module does not ship same day. It must first be assembled (built by hand) after which it is then shipped using shipping method selected at checkout.